3M Vortemp Heating Assembly- V-200 ~ Gallawayb2b.com

3M Vortemp Heating Assembly- V-200

V-200 and V-200SS (stainless steel)
The 3M Vortemp Heating Assembly V-200 and V-200SS is designed to provide those 3M helmets,
loose fitting facepieces and hoods, which are approved for use with it, a continuous airflow of 6 to 15 scfm
(170 to 425 lpm). The control knob is set manually between upper and lower limits to suit the warming
comfort requirements of the user.

3M™ Supplied Air Hose and Pressure Requirements with V-200/V-200SS
W-9435, W-9435SS, W-9445	W-2929 (Coiled)	W-2929SS (Coiled)	Supply Pressure Range
25 ft. (7.6 m)	25 ft (7.6 m)	25 ft (7.6 m)	60-65 psig (4.2-4.6 kg/cm2)
50 ft (15.2 m)	50 ft (15.2 m)	N/A	60-68 psig (4.2-4.75 kg/cm2)
100 ft (30.5 m)	100 ft (30.5 m)	N/A	70-72 psig (4.9-5 kg/cm2)
200 ft (61 m)	N/A	N/A	75-80 psig (5.25-5.6 kg/cm2)
300 ft (91.4 m)	N/A	N/A	85-90 psig (5.95-6.3 kg/cm2)

The 3M Vortemp Heating Assembly V-200 and V-200SS also provides the ability to warm the
compressed air supply by as much as 50º F (28º C).

V-300 and V-300SS, V-100 and V-100SS, V-200 and V-200SS
To use these 3M air regulating valves with a 3M helmet, loose fitting facepiece, or hood proceed as follows:

Connect one end of the breathing tube to the helmet, loose fitting facepiece, or hood. (Follow the
Adjust and buckle the waist belt with air regulating valve comfortably around your waist.
Connect the compressed air hose between the optional 3M filter and regulator panel W-2806 and the
Set the air regulating valve for minimum airflow.
Connect the breathing tube from the hood, loose fitting facepiece or helmet to the air regulating valve.
Put on the helmet, loose fitting facepiece, or hood, and adjust for maximum comfort.
Recheck the air pressure setting to ensure it is still in the acceptable range.
Adjust the airflow or air temperature with the control valve on the air regulating valve for maximum

V-200 and V-200SS
DUE TO THE NEED FOR INSTRUMENTATION TO CALIBRATE FOR PROPER AIRFLOW, THE
VORTEMP™ HEATING TUBE IS TO BE DISASSEMBLED ONLY TO THE EXTENT SHOWN IN
FIGURE 3. DO NOT LOOSEN OR REMOVE THE SETSCREWS IN THE AIRFLOW OF THE
TUBE ASSEMBLY (ITEM 7) BECAUSE OF CRITICAL POSITIONING OF THE VALVE AND THE
NEED TO USE INSTRUMENTATION FOR PROPER ADJUSTMENT OF THE AIRFLOW.
RETURN TO THE FACTORY FOR REPAIR.

Troubleshooting Chart V-100/V-100SS and V-200/V-200SS

Symptom	Possible Causes	Remedy
Vortex Freezes up	Excessive Water in Compressor Air Line	Add Air Drier to Compressor
Inadequate Airflow Inadequate Warming or Cooling	Not Enough Air Pressure Dirty on Inside Compressed Airline Pipe too Small Compressor Has Insufficient Capacity Incoming Air Temperature too High or too Low	Increase Air Pressure Clean and Provide Adequate Filtration of Supplied Air Increase Airline Pipe Size Use Larger Compressor Check Compressor for Overheating Insulate or Move Any Hoses or Pipes, which are heating up Due to Ambient Conditions.
Too Much Warming or Cooling	Control Knob not Adjusted Air Pressure too High	Adjust Control Knob Lower Air Pressure
Excessive Airflow to Headgear	Air Pressure too High	Lower Air Pressure

Q: How does my Package get to me?

A: All packages are sent via UPS ground unless other wise noted by the buyer.

Q: How can I get my products delievered other than UPS ground?

A: When checking out just select a different method from the shipping options, if there is not another method please contact us, and we will try to accomodate your needs.

Q: What are the specifications for returning Goods?

A: Goods ordered in error, must be returned within 30 days of receipt, at customer’s expense and are subject to a 15% restocking charge. All goods must be new and in unopened original packaging. Goods shipped in error may be returned within 10 days for full credit. All returns must be accompanied by a returns good authorization provided when calling 724-239-3999. Special orders and non-stock items are subject to Mfg return policy, etc. Please note that sales are Final on all swine flu protection items. In addition Gallaway Safety reserves the right to substitute respirators for similar items of greater than or equal value and protection rating.

Q: I received only part of my order, what happened?

A: Some of our non-stock items ship directly from manufacturers or different warehouse locations. Please note that because of this, an order of multiple items may ship from different warehouses, causing parts of your order to ship earlier/later than others. Shipping dates may vary by manufacturer and item.

Q: How do I order and receive products that weight in excess on 150lbs?

A: To order products that weight in excess of 150lbs Please call us or email us your concerns and we will quote you a shipping estimate to receive your order via freight delivery. Please note that freight charges are volatile, in that they are subject to change on an hourly basis.

Additional information:

*All orders are subject to approval by our verification dept. We will notify you by phone or email should your order be delayed.

All orders of $250.00 USD and above will require a signature by the receiver via the shipping preference of the initial order.

All orders received through PayPal’s payment gateway system with unconfirmed addresses are subject to cancellation by GallawayB2B.com.

For more information on Paypal's buyer protection policy [click here]

3M Vortemp Heating Assembly- V-200

3M Vortemp Heating Assembly- V-200

Write a Review for the 3M Vortemp Heating Assembly- V-200

Check Here to read more Product Reviews

Current Number of Reviews: 0