3M L-Series Spare Parts and Accessories |
|
|
 |
| |
| Proper use and maintenance of the 3M L-Series equipment is essential to its ability to function. Over time, parts and pieces will become worn or damaged, and they will require replacement. Operating equipment with damaged or worn parts can decrease the 3M L-Series unit’s ability to protect, decrease airflow, and could result in serious personnel injury or even death. Before each use of any 3M L-Series product, please inspect for any rips, damages, tears, etc. |
Product Name |
Part # |
Name |
Additional Information |
Location |
Lens Cover |
|
3M Disposable Lens Covers |
Disposable lens covers help protect the visor from scratches and distortions. Replace as needed to insure proper visibility. Available in packs of 25 (L-133-25) or 100 (L-133-100) |
|
Faceseals and Shroud |
L-121 |
3M Tychem QC Faseal |
Faceseals insure that a proper seal is maintained with the wearer’s Shrouds skin. Damaged or worn faceseals can cause leaks, which could decrease airflow, battery life, and increase the risk of exposure |
|
|
L-1231 |
3M Tychem Shroud |
|
|
|
L-1242 |
3M Flame Retardant Faceseal Polyester |
|
|
|
L-1253 |
3M Flame Retardant Shroud |
|
|
|
L-1284 |
3M Cordura Nylon Shroud |
|
|
|
L-120 |
3M Faceseal Flane Retardant - Softguard |
|
|
Lens Assembly |
L-130 |
3M Wide-view Faceshield Assembly |
|
|
L-131 |
3M Wide-view Faceshield Assembly |
|
|
L-132 |
3M Wide-view Faceshield Assembly |
For use in high temp environments, where there exists potential for warping of the lens |
|
L-134 |
3M Wide-view Faceshield Assembly |
Replace latches when missing or broken. Do not use unit if latches are defective |
|
L-136 |
3M Wide-view Faceshield Assembly |
Replace when faceshield will not stay in up or down position, or if the faceshield is loose in a closed position |
|
L-137 |
3M Wide-view Faceshield Assembly |
Replace assembly when warped |
|
Head Suspension |
L-112 |
3M Chin Strap |
Accessory. Replace when worn or damaged |
|
L-113 |
3M Head Suspension |
Replace when bracket damaged or it will not tighten |
|
L-115 |
3M Sweat Pad |
Replace when dirty or when foam begins to degrade |
|
L-116 |
3M Head Pad |
Replace when dirty or damaged |
|
L-117 |
3M Hanger Suspension |
Replace when broken |
|
External Knobs |
L-140 |
3M Knob |
Replace when missing or broken |
|
L-141 |
3M Knob and Pivot Kit |
Replace when missing or broken |
|
Helmet and Head Seal |
L-163 |
3M Head Seal Kit |
Replace when dirty or damaged |
|
L-182 |
3M Air Deflector |
Replace when missing or broken |
|
L-183 |
3M Headgear Cover |
Prevents scratches and damage to the headtop |
|
1 For 3M L-901 series helmets only
2 Flame retardant faceseal for 3M L-500 and 3M L-700 series helmets.
3 Flame retardant shroud for 3M L-900 Series helmets only.
4 Cordura Nylon fabric shroud for use with 3M L-900 Series only.
References:
3m.(2006).Solutions for Worker Safety. Retrieved on September 24, 2008 from
http://www.3m.com/OccSafety/WorkerSafety
|
|
|
|
|
